Latest News



This site was last updated on 30th October 2018 to include IECEx and ATEX dust certification for BA390 and BA390S intrinsically safe panel lamps.


Latest releases:



BEKA panel lamps gain dust certification


BA390 and BA390S intrinsically safe panel lamps are now available with IECEx and ATEX dust certification. This frequently requested certification further extends the applications for these multicolour lamps and is explained in Application Guide AG390.


Features:

  • ATEX, FM and IECEx intrinsic safety certification.
     
  • Red, Amber, Green, Blue and White models
     
  • 20mA constant current & 4mA low current models
     
  • 10 year life
     
  • IP66 lens
     
  • Go to our intrinsic safe lamps page page.

BA390 intrinsically safe panel lamps from BEKA associates now have IECEx and ATEX dust certification in addition to their original gas approval. Permitting installation in all dust Zones, this additional certification further extends the applications for this extensive range of panel mounting LED lamps.

All models are available from stock.




New process panel meters introduced


High quality universal process panel meters featuring multicolour, negative liquid crystal five digit and thirty one segment bargraph displays which are visible in all lighting conditions from bright sunlight to total darkness. The display colour is fully adjustable and can be linked to the meter's alarm status providing operators with a very conspicuous alarm warning. The meters have process current, voltage and resistance thermometer inputs and are available for use with a low voltage dc or mains power supply.

The rugged A90-SS has a stainless steel enclosure and a toughened glass window suitable for marine applications or for installation in areas where the front of the meter may be impacted.


New process panel meters

  • Multicolour display
  • 5 digits 11mm high & 31 segment bargraph
  • Current, voltage and RTD inputs
  • IP66 front of panel protection
  • dc and mains powered models
  • Easy on-site scale card installation
  • Accessories:
        Dual alarms with single pole change over contacts
        Isolated 4/20mA output and isolated 24V transmitter
        supply.
        Modbus RTU interface
  • Go to our New process panel meters page.

Meters can be supplied calibrated to customer's requirement including a printed scale card for no additional charge.

All models are available from stock.




New Timer or Clocks for field or panel mounting in safe or hazardous areas


Superseding our existing Timers and Clocks, this new range includes compact field mounting and stainless steel panel mounting instruments.


New Timer or Clocks for field or panel mounting in safe or hazardous areas

  • Configured as a:
        Timer - measures elapsed time between
        external events or controls external events.
        Clock - displays local time and controls external
        equipment.
  • Robust enclosures, including stainless steel panel mounting instrument.
  • Models:
        One and two input, externally powered
        Field and panel mounting
  • Certifications:
        Intrinsically safe Ex ia for Zones 0, 1, 2, 20, 21, & 22
        Ex nA & Ex tc for Zone 2 & 22 applications
        General purpose for use in safe area
  • Accessories:
        Backlight
        Isolated dual control outputs
        Pipe mounting kits
        Scale and tagging
  • Three year guarantee
  • Go to our New Timer or Clocks for field or panel mounting in safe or hazardous areas page.

These versatile instruments can be configured on-site as a Timer or as a Clock, or can be supplied configured to customer's requirements for no additional charge. As a Timer they can measure and display the elapsed time between external events using sensors connected to one or two inputs. Optional dual control outputs enable the instrument to control external devices such as opening a valve for a fixed time. Control cycles can be repeated continuously or a specified number of times.

When configured as a Clock the instruments display local time in twelve or twenty four hour format and can be externally synchronised. Optional control outputs enable two external devices to be turned on and off at pre-set times twice in each twenty four hour period.

All models are available from stock.




New Tachometers for field or panel mounting in safe or hazardous areas


Replacing our existing tachometers, this new range includes compact field mounting and stainless steel panel mounting instruments.


New Tachometers for field or panel mounting in safe or hazardous areas

  • Separate easy to read speed and run-time displays
  • Field and panel mounting models
  • Rugged enclosures, including stainless steel panel mounting instrument.
  • Will function with wide range of sensors
  • Certifications:
        Intrinsically safe Ex ia for Zones 0, 1, 2, 20, 21, & 22
        Ex nA & Ex tc for Zone 2 & 22 applications
        General purpose for use in safe area
  • Accessories:
        Backlight
        Isolated dual alarms
        Isolated pulse & 4/20mA outputs
        Pipe mounting kits
        Scale and tagging
  • Three year guarantee
     
  • Go to our New Tachometers for field or panel mounting in safe or hazardous areas page.

This range of tachometers can display speed in engineering units from almost any pulse output sensor such as a proximity detector. To simplify maintenance they can also display the run-time of the monitored machinery. Parameters are easy to adjust on-site and models are available for installation in most safe and hazardous areas. Instruments can be supplied ready to install with customer specified configuration, scale and tag marking.

All models are available from stock.

Return to the top of this page